PDA

View Full Version : FS: Parts (some aftermarket)



damnDSM
May 27th, 2009, 03:57 AM
Most of the engine and drivetrane parts are spoken for but I pretty much have a full parts car.

What I do have: (everything is from a AWD 95-96 Talon TSI unless noted otherwise)
-gray interior (minus door panels)
-seats (leather) ---- $50ea front $65 rear comp. set
-doors (2 black, 2 white electric windows/locks) ---- $40ea.
-windows ---- $15
-hatch (one low spoiler talon, one wingless GST both white) ---- $35ea.
-relays, evap, sensors, etc..
-dirveshaft ---- $35
-full ABS with lines
-wiring harness(es)
-gas tank ---- $40
-stock suspension (140k on the clock..)
-6bolt FWD flywheel (still on my GST at the moment) ---- $20
-95-96 non EPROM ecu ---- $65
-intake manifold (bare) ---- $15
-2ga head lights (one set has painted black housings, the other set it stock and a little foggy) ---- $30 a set
-white 2g hood (slight bubbling from underhood fire about 4x2 inches)
-down stream o2 sensor ---- $10



Aftermarket parts
-ImportIntelligence.com white gauge face and needle kit (needle lights "Hyper Red") never installed ---- $20 (priced it at $90) comes with white HVAC face
-Walbro 255-"HP" fuel pump. unknown mileage, but works fine ---- $70
-FIC 650cc injectors (still on the car. less than 10,000mi) ---- $200
-SBR Bastard 20g TDO5H tight, very little shaft play, no smoke (I will list the price as soon as I get it off of the car for inspection)
-J-pipe thick high quality (like extreme psi) ---- $50
-braided SS oil feed/filter housing/16g + 90* fitting (DSMPARTS) ---- $30
-Greddy auto turbo timer (rare black/gold) with HKS 2g plug and play harness ---- $90
-Injen aluminum intake pipe with recirc. ---- $65
-head gasket new (will edit with brand and part no.) ---- $30


I am willing to negotiate on some of the prices and I might have more items that are not listed. PM for more details and any questions that you might have.


I will add pictures through out the week.


What I do not have:
AWD calipers/dust shields/rotors
motor/trans/xcase/
driveshaft mounting brackets
exhaust/downpipe/cat./exhaust manifold

OpieGSX
May 27th, 2009, 01:14 PM
If no one takes that fuel pump in like a month I'll take it! and whats the condition of the leather seats?

damnDSM
May 27th, 2009, 02:21 PM
If no one takes that fuel pump in like a month I'll take it! and whats the condition of the leather seats?

Driver seat: Several rips in the upper on the sides, lower portion also has a few rips on the sides. The seat itself is in fine shape, but the leather is in poor condition.

Passenger: Upper portion has wear spots on the sides, lower portion of the seat has wear on the side from people getting in and out. A few scuff but no rips.
The overall condition is fair.

The rear seats are in flawless shape. No rips, no wear, no undone stitching. (typical for the rears)

OpieGSX
May 27th, 2009, 03:57 PM
Yeah my Rears are in Perfect condition, but the Leather on my Seats are pretty worn...