DAGA
December 8th, 2009, 04:05 PM
AEM Methanol Injection System!
http://d5otzd52uv6zz.cloudfront.net/i-082007e4-8144-4fdd-acbe-6a2c4fdd7a7f-420.jpg (http://www.slowboystore.com/aem_advanced_engine_management/aem_water_injection_kit/303000/i-132146.aspx)
The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required.
STANDARD WATER INJECTION KIT
* Universal kit includes everything you need for installation
* Progressive, controller-driven 150 PSI pump
* One-gallon tank with integral fluid level sensor
* Dash light for system status and low fluid warning
* Alcohol Compatible (up to 50% in solution with water)
* Progressive controller, provides boost-dependent
variable flow
* Output provided to either decrease timing or boost if the system runs out of fluid or detects an error
* Includes three jets to match your power requirement
HD WATER INJECTION KIT
* Kit includes everything needed for installation
* Large-capacity 5-gallon reservoir with integral fluid level sensor
* Boost Safe lets you retard the timing or reduce boost if the system runs out of fluid or detects an error
* Progressive, controller-driven 150-PSI pump provides boost-dependent variable flow
* Dash light relays system status and low fluid warning
* Methanol & alcohol compatible (up to 50% in solution with water)
* Includes three jets to match your power requirements
* Includes three jets to match your power requirements
* Reduces exhaust gas temperatures (EGTs) and inlet air temps on turbo-diesel and gas applications
Regular Price: $377.54
SBR Price: $ It's good, PM me! :hellyeah:
This is a kit that I am very familiar with! It's a great kit that works very well, has a proven track record for performance and is made up of very quality parts!
As always, thanks for your time and consideration!
http://d5otzd52uv6zz.cloudfront.net/i-082007e4-8144-4fdd-acbe-6a2c4fdd7a7f-420.jpg (http://www.slowboystore.com/aem_advanced_engine_management/aem_water_injection_kit/303000/i-132146.aspx)
The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required.
STANDARD WATER INJECTION KIT
* Universal kit includes everything you need for installation
* Progressive, controller-driven 150 PSI pump
* One-gallon tank with integral fluid level sensor
* Dash light for system status and low fluid warning
* Alcohol Compatible (up to 50% in solution with water)
* Progressive controller, provides boost-dependent
variable flow
* Output provided to either decrease timing or boost if the system runs out of fluid or detects an error
* Includes three jets to match your power requirement
HD WATER INJECTION KIT
* Kit includes everything needed for installation
* Large-capacity 5-gallon reservoir with integral fluid level sensor
* Boost Safe lets you retard the timing or reduce boost if the system runs out of fluid or detects an error
* Progressive, controller-driven 150-PSI pump provides boost-dependent variable flow
* Dash light relays system status and low fluid warning
* Methanol & alcohol compatible (up to 50% in solution with water)
* Includes three jets to match your power requirements
* Includes three jets to match your power requirements
* Reduces exhaust gas temperatures (EGTs) and inlet air temps on turbo-diesel and gas applications
Regular Price: $377.54
SBR Price: $ It's good, PM me! :hellyeah:
This is a kit that I am very familiar with! It's a great kit that works very well, has a proven track record for performance and is made up of very quality parts!
As always, thanks for your time and consideration!